Innovative products make the difference between ordinary and extraordinary projects.
 

We offer a range of loudspeakers to suit small and large models.

We cannot make specific recommendations for loudspeaker enclosures as they are so dependent on every individual model. We can say though, "as large as possible, and as rigid as possible", given weight, size and other restrictions in the model. Also putting acoustic wool inside helps, but you mustn't stuff it completely full - its all a matter of experimenting.

Note : These loudspeakers can only be ordered at the same time as ordering one of our sound modules.
 

Click here for specs.

This German engineered loudspeaker sounds terrific, yet is shallow and light weight - weighs only 160gr.

This fine loudspeaker can handle 20 watts continuous, 30 Watts peak. The 8 Ohm version is suitable for our SFX6 sound module on up to 18 Volts. It can also be used with the SFX6 module on its maximum supply voltage if you turn the volume control on the module down to 3/4 to limit the maximum power output.

If you wish to use the SFX6 module on its maximum supply voltage AND you wish to get maximum volume out of it, then two of these speakers in the 4 Ohm version wired in series should be considered.

Loudspeakers are relatively bulky, therefore, depending on your location, we may have to charge more for shipping than the standard minimum charge our on-line billing system makes. The standard shipping charges are explained on our Ordering/Shipping Page.
 

Click here for specs.

This German engineered loudspeaker sounds terrific, yet is shallow and light weight - weighs only 290gr. It also has a concentric tweeter cone.

This larger loudspeaker can handle 30 watts continuous, 50 Watts peak.

Two of these loudspeakers can be used with our SFX6 modules on 26Volts.

Click here for specs.

This German engineered loudspeaker sounds terrific, yet is only 80mm square (3.1 inches).
It is intended for use with our SFX6 sound modules in smaller models on lower supply voltages (up to 12Volts).

This smaller loudspeaker can handle 10 watts continuous, 15 Watts peak.

CAUTION : if you want to use this speaker with our very powerful SFX6 sound module you must exercise caution with the volume control to limit the power delivered to this speaker. The SFX6 module could burn out this small speaker if used on higher supply voltages.

Loudspeakers are relatively bulky, therefore, depending on your location, we may have to charge more for shipping than the standard minimum charge our on-line billing system makes. The standard shipping charges are explained on our Ordering/Shipping Page.
 

Click here for specs.

This German engineered loudspeaker sounds terrific, yet is only 67mm square (2.5 inches).
It is intended for use with our SFX6 sound module in smaller models and on lower supply voltages (up to 12V) with the volume control reduced from maximum.

This smaller loudspeaker can handle 8 watts continuous, 15 Watts peak.

CAUTION : if you want to use this speaker with our very powerful SFX6 sound module you must exercise extreme caution with the volume control to limit the power delivered to this speaker. The SFX6 module could easily burn out this small speaker.

Loudspeakers are relatively bulky, therefore, depending on your location, we may have to charge more for shipping than the standard minimum charge our on-line billing system makes. The standard shipping charges are explained on our Ordering/Shipping Page.